Page: 4410
| Established in 1952 |
|
Page: 4410
|
Raw aluminum pallet castings are available for organizations that would like to machine their own hardware to custom dimensions.
These castings are produced in type 356 Aluminum Alloy that is solution annealed and hardened to a condition of T4.
This heat treatment provides the hardest, strongest and easiest to machine commercial condition.
All of these pallets are approximately one and three-quarters (1.750) inches [44.45mm] thick.
These pallet castings are ribbed on the back side to reduce the weight, while maintaining their structural soundness.
The smallest pallet, our part number 6-24. It is approximately
six and one-quarter (6.25) inches [159mm] wide by twenty-four and
one-quarter (24.25) inches [616mm] long. It is approximately one
and three-quarters (1.75) inches [45mm] thick. It weighs
approximately 16.24 pounds (7.4 kilograms).
The next largest casting, our part number 12-16, is
approximately twelve and one-quarter (12.25) inches [311mm] wide
by sixteen and one-quarter (16.25) inches [406mm] long. It is
approximately one and three-quarter (1.75) inches [45mm] thick.
It weighs approximately 20.54 pounds (9.3 kilograms).
The largest standard pallet casting, our part number 12-24, is approximately sixteen and one-quarter (16.25) inches [413mm] wide, by twenty-four and one-quarter (24.25) inches [616mm] long. It is approximately one and three-quarter (1.75) inches [45mm] thick. It weighs approximately 32.2 pounds [14.6 kilograms].
| Part | Length | Width | Height | Weight |
| 624CAST | 6.25" | 24.25" | 1.75 | 16.24 lbs |
| 159 mm | 616 mm | 45 mm | 7.4 kg | |
| 1216CAST | 12.25" | 16.25" | 1.75" | 20.54 lbs |
| 311 mm | 406 mm | 45 mm | 9.3 kg | |
| 1224CAST | 16.25" | 24.25" | 1.75" | 32.2 lbs |
| 413 mm | 616 mm | 45 mm | 14.6 kg |
http://www.precisionballs.com |
||||||||
|---|---|---|---|---|---|---|---|---|